Aquatec DC Solar LCB Pump Controller
Aquatec Pump Control for SWP 4000 and 6000 series submersible pumps.
The APC-30-250 can be used in solar direct applications with the Aquatec series 4000 and 6000 pumps. It features built-in linear current boosting to open up the operating window of the pump, yielding more run time and more water pumping per day.
It also hosts a set of features including; flow control (to limit gpm for lower producing wells), low water cut off, over current protection, float switch support, and remote tank switch control.
The control can also be used with 24 volt battery based applications. An additional Battery Power Mode can be enabled to keep battery voltage from dropping below 24.7 VDC for battery preservation.
- Voltage input range for Solar Direct or Battery Based applications: 24 to 40 VDC
- Max Load Power: 250 watts
- Max Load Current: 5 Amps
- Max Input Open Circuit Voltage: 48 Volts
- Max Regulated Output Voltage: 30 Volts
Dimensions: 6.55" x 6.13" x 3.75"
Shipping Weight: 2.0 lbs
Warranty: 18 months from date of manufacture
- DOWNLOAD LINKS
- Additional Information
model APC-30-250 SKU P-AQ-APC30-250