AC OR DC BREAKER BOX
CODE APPROVED FOR LOW VOLTAGE DC OR AC

SQUARE D circuit breakers in their "QO" line are UL listed for 12 and 24 volts DC circuits. Q-O circuit breakers are available from 10 amps up to 60 amps, no higher. Therefore, these load centers can be used for most DC lightning or appliance circuits, but NOT for inverter DC connection. Also used for 120 volt AC circuits as a separate unit. Do not mix voltages in same box!

9"W x 12-3/4"H x 4"D

We now stock model #QO612L100S, a six circuit load center. We ship it with two 20 amp QO-1205272 breakers included for the price others sell empty. The remaining four empty breaker slots may be filled with breakers of your choice. 

O-QO612 load center with two 20 amp breakers: $68  Shipping $10
O-QO Breakers 10, 15, 20, or 30 amp: please specify what size...... $14 each
O-QO Breaker 60 amp ...... $18 each

INVERTER DISCONNECT
Main Battery Disconnect
 by Xantrex

DC Rated Circuit Breaker designed for connecting 1000 to 5500 watt inverter to battery safely. The 175 amp or 250 amp circuit breaker / disconnect is enclosed to pass National Electric Code. Design matches other Trace products.

Easily installs to inverter battery cable by cutting and connecting the positive cable directly to the breaker. Accepts up to 4/0 cables directly in clamp terminals of breaker.

Size 10-1/2"W x 21"H x 5"D

Consider Making Your Own Powercenter. See kit using this item.

Extra breakers to fit the four knockout spaces in box edge:

O-CD20: 20 amp DC  $24
O-CD30: 30 amp DC  $24
O-CD60: 60 amp DC  $24
O-CD80: 80 amp DC  $24
O-CD100: 100 amp DC $57

A negative terminal block to join more negative / ground wires within box. Joins four 4/0 cables & two 1/0, & two #2, & four #4 wires.

O-DCBB:  $70

Return to the top

AC and DC Disconnect Boxes by Outback

FLEXWARE 500 DC  18.2 H x 11.4 W x 12.1 D

ETL listed indoor enclosure includes the following items:
One main inverter breaker: 100, 175, or 250 amps
Knockouts for one more inverter breaker and eight smaller load/input breakers or five smaller load/input breakers plus one GFP/2 ground fault protector
500 amp 50 millivolt DC current shunt
Battery (+) and (-) bus bars
Knockouts on Five surfaces for conduit, cable clamps, and MX60 grommets

O-FLEX500DC-100....shipping $18......$335
O-FLEX500DC-175....shipping $18......$395
O-FLEX500DC-250....shipping $18......$395

 Extra Large Inverter Breakers for the FLEXWARE 500 DC Disconnect Box

O-OBDC-100: $57
O-OBDC-175: $129
O-OBDC-250: $129

MX60 Mounting Bracket, plus Smaller Input and Load Breakers for the FLEXWARE 500 DC Disconnect Box: please note that no small breakers are included with the FLEXWARE 500 DC box

O-FLEXCCB: mounting bracket for one side mounted Outback MX60 controller: $39
O-OBDC 5, 10, 15, 20, or 30.......please specify size.....$25
O-OBDC 40, 50, 60, or 80......please specify size.....$25

DC Ground Fault Protection System...Required by NEC for PV arrays mounted on dwelling roof. The GFP/2 protects wiring and system components for one or two arrays. Requires three small breaker spaces in the FLEXWARE 500 DC box. Dual 80 amp breakers for 125VDC maximum Voc.

O-OBDC-GFP/2.....$129

Outback offers a Mounting Plate for the FLEXWARE 500 DC, FLEXWARE 500 AC, and one to two inverters

O-FLEXWARE500MP...........Shipping $18..............$169

FLEXWARE 500 AC 18.2H x 11.4W x 12.1D

ETL listed indoor enclosure includes the following items:
Dual 60 amp Inverter bypass breaker
Dual 60 amp AC input breaker
Dual 60 amp AC output breaker
Ground Bus Bar
One insulated AC neutral bus bar
Two insulated black AC Hot bus bars
Two insulated red AC Hot bus bars
Knockouts for 10 additional Outback AC breakers and provisions for mounting X240 transformer
Flex conduit to run between Flexware AC and Flexware DC boxes

O-FLEX500AC......shipping $18.......$495

Single and Double pole AC Load Breakers for the FLEXWARE 500 AC Disconnect Box:

O-OBAC 15, 20, 30, 50, or 60 single pole breaker.......please specify size.....$19
O-OBAC 15D, 20D, 25D, 30D, or 50D double pole breaker......please specify size.....$39

 
DC RATED FUSES 
WITH FUSE HOLDER FOR INVERTERS

Fuse blocks directly accept large inverter battery cables. A fuse and holder is basic protection against electrical fires from over-current in wiring. Fuses and holders by themselves are not accepted by National Fire Code unless mounted in an approved metal box. Replacement fuses available from Backwoods if you do not find them locally.

	INLINE 400 Amp Class T fuse in plastic enclosure. Mounts on inverter cable. O-INLINE 400: $68 O-400 AMP T Fuse Only: $28
	200 Amp Class T fuse in plastic enclosure. Mounts on inverter cable. O-INLINE 200:  $60 O-200 AMP T Fuse Only: $20
	Up to 800 watt 12 volt inverter or up to 1800 watt 24 volt inverter. 100 Amp Class R Fuse with wall mount holder for #2 wire O-FB100:  $42 O-100 AMP R Fuse Only: $20

Minimum shipping $8 per whole order covers all items with no shipping listed

SMALLER DC FUSES

30 amp above 40, 60 amp below

30, 40, 60 AMP FUSES for Solar charge, DC pump, refrigerator, lights. Every wire from battery positive must be fused for safety. Select a fuse rated 125% to 150% over normal amps expected, and no higher than amp capability of smallest wire in circuit. These fuse holders have clamps for wire sizes up to 2 gauge. O-FB60: 40-60 Amp Holder & Two 60 A Class R Fuses $24 O-FB40: 40-60 Amp Holder & Two 40 A Class R Fuses  $24 O-FB30: 30 Amp Holder & Two 30 A Class R Fuses $24 O-R30, R40, or R60 AMP Fuse Only: one fuse; please specify which amperage in the Message section of the order form. $9

SIX FUSE  Block of six 15 amp auto type AGC glass fuses, holder connects battery positive to top of all fuses. Screw terminal bottom of each for loads. Low voltage DC only. 6 fuses & 6 spares. O-SIX FUSE:  $18

3 AMP IN-LINE FUSE & HOLDER with wires. For meters and small items. O-IN-LINE:  $3

Minimum shipping charge $8 per order covers all items with no shipping listed

Return to the top