Free Custom Design & Support

Call us to discuss your system today!  208-263-4290

Aquatec, SWP-6000, Submersible Pump

Item Code:P-AQUA-6000

Model #:SWP-6000

Be the first to review this product


Aquatec SWP-6000 submersible pump

More Views

  • Aquatec SWP-6000 submersible pump


The Aquatec SWP-6000 is a submersible pump ideal for many off-grid applications.   The DC motor can be driven by 12 or 24 volts from a battery bank or solar panel direct (considered 15 and 30 volt applications).   As a lower volume pump it is well suited for filling livestock troughs or holding tanks.

The "6000" model is the sister pump to the Aquatec SWP-4000 model.  The 6000 offers higher volume (up to 5 gpm) at lower maximum lift (120').  The 4000 offers lower volume (up to 1.7 gpm) at higher maximum lift (230').

It's rugged design includes a stainless steel casing, a double O-ring seal against leaks into the motor, a factory installed electrical wiring harness (with 36", 12 gauge leads), and a stainless steel water intake. The pump is field servicable a with a typical service cycle of two to seven years depending on use.

Solar direct applications should use a nominal panel size of ~150 watts at 24 volts for standard applications, but larger 60 cell panels can be used for peak performance and a wider window of operation.  Always use a P-LCB-7 linear current booster in solar direct applications, ordered separately.

Maximum total lift of 120'.

Aquatec recommends a maximum submersion depth of 100', meaning the pump should not be positioned any deeper than 100' below the static water level.

12 volt configurations: 1.10 gallon per minute flow rate at 120' of lift (4.4 amp draw), 2.10 gpm at 0' of lift (0.80 amp draw)

30 volt configurations: 3.30 gallon per minute flow rate at 120' of lift (5.0 amp draw), 5.00 gpm at 0' of lift (2.0 amp draw)

See the performance tables in the Product Manual for a full spread of lift and power requirements.

5.75" diameter

Dual-Size Stainless Steel Outlet Nipple Fits 0.5" Hose Barb Tubing (0.50 Inch ID) or 0.5" Poly Pipe (0.62 Inch ID).
Inlet: 50 Mesh Stainless Steel  Screen  

Consider ordering P-SFWire and P-Hose by the foot to work in conjunction with the Aquatec SWP-6000. 

Made in the U.S.A. 

Warranty of 12 months from date of purchase or 18 months from date of manufacture.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.