Free Custom Design & Support

Call us to discuss your system today!  208-263-4290

Tamarack, Pole Top (6"), Dual Columns 115"

Item Code:S-UNI-TP/10LL

Model #:UNI-TP/10LL

Be the first to review this product


Tamarack, Pole Top (6"), Dual Columns 115"

More Views


Tamarack Top of Pole Mount, Dual Columns 115" Top of pole mount to hold two columns of panels, on a rail lengths of 115". Select a Top of Pole Mount by making sure the rail length will span the dimensions of the modules you plan to use. In most cases, the panel(s) will sit in landscape orientation on top of rails that run up and down beneath it; so the width of the panel(s) must be compared to the length of the rails. In this case, a single column can accommodate four panels measuring 26.25" wide; so the two columns together can hold a total of 8 panels of that width. Other combinations of panel sizes and quantities are possible as well. In some cases the hole spacing on the panel frame can be a factor in selecting the correct mount. Tamarack mounts are manufactured using powder coated steel and heavy-duty corrosion-resistant 5000 series aluminum. Seasonal tilt of the array is easily managed by loosening/tightening a simple set of nuts and bolts (a second person should hold the array in place for the weight and wind gusts, while adjusting). Mounts on a 6" schedule 40 steel pipe, purchased locally. Maximum height of pole, and size of the hole required are documented in the installation manual. Picking out the proper pole mount for your array can entail many considerations, mounting hole spacing in the panel frame can affect selection; feel free to call Backwoods for our recommendations. Maximum pole height above ground: 6' Module tilt range: 15 to 65 degrees Made in USA 10 year warranty

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.