AP Systems QS1 MicroInverter
Microinverters are used in grid-tie systems. They are mounted behind the solar modules on the rail system or on the frame itself. DC power is converted to AC power at the module and fed into a common branch circuit trunk cable which is then fed to the household utility panel. Converting power at the solar module allows for "per module" power management. If a single module in an array is shadowed or compromised, it will not affect the performance of other modules in the array; a distinct advantage over traditional string inverters.
The APsystems QS1 is a quad module microinverter, meaning a single unit can accommodate four modules, reducing cost and speeding install time. Each module is connected via independent MPPT inputs. AP Systems boasts a wider MPPT voltage range than most competitors, meaning greater energy harvest in low light conditions. Wireless communication reports operational data to the AP Systems Energy Communication Unit (ECU, sold separately) located in your home.
- Module compatability: 60 or 72 cell modules
- MPPT Voltage Range: 22V-48V
- Operation Voltage Range: 16V-55V
- Maximum Input Voltage: 60V
- Startup Voltage: 20V
- Maximum Continuous Output: 1200W
- Nominal Output Current: 5A
- Nominal Output Voltage: 240VAC
- Maximum MicroInverters per Branch Circuit: 3 (12 PV modules)
- Operating Temperature Range: -40F to 149F
Measures: 11.1" x 9.1" x 1.6"
Weight: 9.9 lbs.
The QS1 microinverters meet NEC 2014/2017 690.12 Rapid Shutdown requirements and are compliant with CA Rule 21.
10 year warranty
- DOWNLOAD LINKS
Available Download Links
APSystems QS1 Microinverter Install/User Manual (PDF) APSystems Microinverter Limited Warranty (PDF) APSystems QS1 Extension Cables Notice (PDF) QS1 Data Sheet (PDF)
- Additional Information
model QS1-NA SKU I-AP-INVQS1