Morningstar SunSaver MPPT 15 Amp Charge Controller w/LVD
The SunSaver MPPT 15L is one of the smallest MPPT charge controllers available that can utilize a variety of panels, including 24 volt and 60 cell modules, to properly charge 12 volt and 24 volt battery banks.
Built-in features include 4 stage charging, low voltage disconnect/load control, ambient temperature sensing, status LEDs, battery type selection and 4 configuration DIP switches. Additional accessories allow addition of remote temperature sensing, remote digital display, custom voltage configuration, data logging and lighting control configuration.
Maximum PV Voc: 75 volts
Maximum battery current: 15 amps
Battery bank voltage range: 7-36 volts
Nominal maximum PV array size:
200 watts for 12 volt battery bank
400 watts for 24 volt battery bank
Power consumption: 35 mA
Like many of the Morningstar charge controllers, the SunSaver MPPT 15L features a communication port for additional functionality; including use with a computer and Morningstar's MSC(PC Meterbus Adapter), for custom voltage setpoints, data logging, and lighting control. Morningstar's Remote Display, RM-1 can also be connected to monitor the controller's operation.
Connection points are also provided for Morningstar's Remote Temperature sensor, to monitor temperature of a battery bank in a separate battery enclosure.
Dimensions: 6.6" x 2.5" x 2.9", weighs 1.3 lbs
Made in the USA.
- DOWNLOAD LINKS
Available Download Links
Morningstar SunSaver MPPT15L 15A 12/24V Charge Controller Spec Sheet (pdf) Morningstar Corp SunSave MPPT Install, Operation and Maintenance Manual (PDF) Morningstar Corp Load Control W/Relay - for Large, Inductive, or Capacitive Loads Technical Documents (PDF)
- Additional Information
model SS-MPPT-15L SKU C-MS-SS-MPPT15L