Samlex Step Down Voltage Converter - 48/12V-8A
Voltage converters are often used in off-grid homes where the voltage of a DC appliance does not match voltage of the system's battery bank. A voltage converter taps the voltage of the battery bank, and “steps-up” or “steps-down” to the appropriate output voltage. The output can be used to energize a small DC breaker panel, or can be wired directly to a circuit to support an appliance. In step-down applications with long wire runs, the step-down converter can be placed at the end of the wire run for a more efficient, higher voltage transmission.
The Samlex IDC-100C-12 converts incoming 48 volts down to a 12 volt output. Maximum current on the output side is 8 amps.
Input voltage range: 30 - 60 VDC; for battery sets that equalize to 60 volts or higher, consider using a DC switch or circuit breaker to disconnect power to the converter when running EQ cycles. This model does not have built-in over voltage protection on the input side.
Output voltage: 12.5 VDC
Measures: 5.9" x 3.5" x 1.9"
Weighs 1.2 lbs.
Two year warranty.
Samlex specifically states to not use this device as a battery charger.
- DOWNLOAD LINKS
Available Download Links
Samlex IDC-100C-12 Converter Spec Sheet (PDF) Samlex IDC-100 User Manual (PDF)
- Additional Information
model IDC-100C-12 SKU A-SAM-IDC100C12