SnapNRack Splice R2 Kit Clear 1 PC, UL

SnapNRack Splice R2 Kit Clear 1 PC, UL
SnapNRack Splice R2 Kit Clear 1 PC, UL


SnapNRack Splice R2 Kit Clear 1 PC, UL

SnapNRack panel mounting system.

The Series 100 product line from SnapNRack offers a sturdy, flexible, easy-to-install, and cost effective roof mounting solution for solar panels.   The standardized rail architecture uses an upper/lower or left/right rail set to hold panels in a row of any length.  Sliding mid and end clamps hold the panel frames to the rails; and a variety of feet serve as the mounting points to secure the entire assembly to the roof.

The channeled design of the aluminum rails allows the position of the feet to be easily adjusted so that penetrations into the roof itself can be aligned to hit structural timbers for the strongest attachment possible.

A typical SnapNRack solution will consist of several components, including; rails, rail splices, end and mid clamps, rail caps,  and mounting points.  A variety of mounting points are available to choose from, depending on the type of roofing material, including standard L-Feet, Flashed L-Feet, Corrugated Blocks, Standoff Posts, and more.  Knowing the dimensions of your roof space, and the make and quantitiy of the panels, Backwoods can readily recommend a configuration to best suit your needs.

The S-SNR-SPLICE-CU model number designates a rail SPLICE kit with a Clear anodized aluminum finish.

Note: Picture shows a black splice kit.  The clear kit has a standard silver/grey anodized aluminum color.

Rail splice kits are used to connect to rail sections together, to form one longer continuous rail.  Order one kit for each rail-to-rail junction point.

Series 100 Residential Roof Mount System Installation Manual (PDF)

Shipping dimensions: 9" x 2" x 2", weight: 0.7 lbs.


Available Download Links

Additional Information

Additional Information

model 242-04014